IC-A110
VHF Air Band
Transceiver $1600.00 AUS
 |
Rugged and reliable for
serious ground crew communications. Setting a new standard for ground
based communications, the IC-A110 provides durability and reliability in
demanding operating environments. Capable of being installed in any
vehicle, IC-A110 is adaptable to vehicles working on a 12 V DC as well as
a 24 V DC power source.
Two versions of the IC-A110 are
available. Version 4 requires PC software and a connection cable for
frequency programming. Version 5 is capable of direct frequency entry via
the front panel controls. |
| |
Specifications:
- Dimensions:150(W), 50(H), 180(D)mm,
1.5kg
- MIL spec. Meets
MIL-STD810
- TX power: 36 W typical pep (9 W typical
for CW)
- Audio output
- Internal speaker: 1.5 W
- External speaker: more than 10 W w/ 8 ohm
load
- Headset (side tone): more than 0.1 W w/
500 ohm load
- Frequency coverage: 118-136.975 MHz
- Channel spacing: 8.33/25 kHz auto
selection or 25 kHz only (depending on version)
- Capable of operating on 12V DC as well as
24V DC
- Front mounted loud speaker
- Memory channel name capability
- Side tone function
- Usable in extreme cold
|
| |
Accessories
- CS-A110 Programming Software (Req OPC478 + OPC492 $88.00
- OPC-478 Adaptor Cable $66.00
- OPC-592 Adaptor Cable $17.60
- OPC-871 Headset Adaptor $204.60
- SEC1212 DC Power Supply for ground installation (Req SEC12110) $360.80
- SEC12110 Base Station Cabinet (Req SEC1212) $41.80
- HM100N Microphone (Standard) $88.00
- SM25 Microphone (Desk type) $264.00
- OPC-346 DC Cable, 20A, 3m $39.60
Place your order click here
Email gilbert
Return to Bright Service Centre home page
This page updated by Gilbert Griffith 30th September 2002
| |